54
e700 User Manual
Electromagnetic Immunity
EMISSION TEST
COMPLIANCE
ELECTROMAGNETIC ENVIRONMENT
-GUIDANCE
RF emissions
CISPR 11
Group 1
The O-Two e700 uses RF energy only
for its internal function. Therefore, its RF
emissions are very low and are not likely
to cause any interference with nearby
electronic equipment
RF emissions CISPR 11
Class B
The O-Two e700 external power supply
is suitable for use in all establishments
including domestic establishments and
those directly connected to the public
low-voltage power supply network that
supply buildings used for domestic
purposes
Harmonic emissions
IEC61000-3-2
Class A
Voltage fl uctuations/
fl icker emissions
IEC61000-3-3
complies
IMMUNITY TEST
IEC60601 REQUIRED
TEST LEVEL
ACTUAL COMPLIANCE
LEVEL
Electrostatic discharge
(ESD) IEC61000-4-2
± 6 kV contact
± 8 kV air
± 8 kV contact
± 15 kV air
Electrical fast transient/
burst IEC61000-4-4
± 2 kV for power supply lines
± 2 kV for power supply
lines
Surge IEC61000-4-5
± 1 kV line to line;
± 2kV line to earth
± 1 kV line to line;
± 2kV line to earth
Voltage dips, short
interruptions and voltage
variations on power supply
input lines IEC61000-4-11
<5%U
T
for 0.5 cycle
40%U
T
for 5 cycle
70%U
T
for 25 cycle
<5%U
T
for 5 s
<5%U
T
for 0.5 cycle
40%U
T
for 5 cycle
70%U
T
for 25 cycle
<5%U
T
for 5 s
Power frequency
(50/60Hz) magnetic fi eld
IEC61000-4-8
3 A/m
30 A/m
Conducted RF
IEC61000-4-6
3Vrms: 150 kHz to 80 MHz
outside ISM bands
3 Vrms
10Vrms: 150kHz to 80 MHz in
ISM bands
10 Vrms
Radiated RF
IEC61000-4-3
10 V/m @
80 MHz to 2.5 GHz
30 V/m
O-Two e700 is intended for use in the electromagnetic environment
in which radiated RF disturbances are controlled. The user can help
prevent electromagnetic interference by maintaining a minimum
distance between portable and mobile RF communications
equipment (transmitters) and the O-Two e700 as recommended
below, according to the maximum output power of the
communications equipment: