Page
4
of
14
Installation Instructions
Mounting Holes
There are 4 mounting holes in the base of the unit, these are located behind the front panel screws
See
Figure 1
the distance between mounting holes is 110mm wide X 160mm high.
PSU Wiring
The T4000 has the option of coming with a
240vac to 24vdc PSU
as shown below in
Figure 1
, if a PSU
is supplied then 240vac should be wired into the LNE terminals, the output of the PSU is 24vdc and
the
+-
terminals should be wired to the
+-
terminals of the T4000 as shown in
Figure 2
.
Figure 1
