NyQuest Innovation Labs Q-Code, User Manual

Page: 326 / 346

Q-Code User Manual
Ver. 7.0 2021/11/30 326
64 9900.9 50 12345. 3C 16393. 28 24390. 14 47619.
Ex.
Use RAM to set playback speed.
TR1: X0=0x63, PlayV($V0,X0)
；
Playback sample rate as 10KHz.
TR2: X0=0x7C, PlayV($V0,X0)
；
Playback sample rate as 8KHz.
5.9 Unusable Commands for Special Path
The special path: 512us, 1ms, 2ms, 4ms, 8ms, 500ms, 1sec, 4sec, Int_256us, Int_512us, Int_1ms,
Int_500ms and interrupt don’t support the following commands.

Arithmetic Logic Command: Multiplication commands, division commands.

Condition Jump Command: CheckSum?Path.

IO Command: Px.n=1KHz(sec).

Path Command: StopFG, BG(BG1,BG2), StopBG, StopBG1, StopBG2, Macro, Subroutine, Break.

Voice Command:
All Voice commands.

Sentence Command: All Sentence commands.

SPI Command:
All SPI commands.

Melody Command: All Melody commands.

Keyboard Command:
All Keyboard commands.

Volume Command: All Volume commands.

Touchkey Command:

Ri=Touchkey command is unresticted.

The rest Touchkey commands, except 500ms / 1sec / 4sec path.

Table Command: All Table commands.

IR Command:
All IR commands.

SC_RX Command: All SC_RX commands.

SC_TX Command:
All SC_TX commands.

PWM Command: All PWMcommands, except NY9T 500ms / 1sec / 4sec path.

Delay Command:
All Delay commands.

Action Command: All Action commands.

QFID Command:
All QFID commands.

MISC Command: All MISC commands.

SW_Reset: Except NYT9T 500ms / 1sec / 4sec path.