Q-Code User Manual
Ver. 7.0 2021/11/30
22
2.3 Text Edit Area
This area is for user to edit
Q-Code
program. Similar to the operation of general text editing software, line
numbers are shown on the left side of the editing interface, and color-changing function will be carried out
according to commands and keywords defined in
Q-Code
language. Other than main menu and hotkeys,
user can also utilize all kinds of editing features through the menu accessed by right-clicking the mouse,
and edit
Q-Code
program using “Section”. For detailed information of developing
Q-Code
application,
please refer to
Q-Code
structure.
Filename:
Shows filename.
Column Indication:
The icon of program operation or breakpoint.
Jump To Section:
Move the cursor to the selected section.
File Display:
The file content.
Section Indication:
Shows the current sections.
2.4 Debug Mode
This function only supports NX1 series. Press “Run” to enter the debug mode, and then the Watch
window and the Register window will appear.
2.4.1 Watch Window
Users can add the target registers or variables to observe for easy tracking.
Column indication
Jump to Section
File display
Section indication
Filename
Breakpoint indication
