8
Transport and storage precautions
•
The AUTOCLEAVER LDF
™
is a precision instrument and must be protected against humidity, vibrations and shock during
transportation and storage.
•
When the machine is moved from a cold to warm environment, you should allow about an hour for acclimatization. By this
time, any condensation should have dissipated.
•
Always transport the instrument in its original packaging materials, with its transportation safeties and with the marked
side up to prevent damage. Remove fiber handling parts that could come loose during transportation.
External care precautions
•
Never use spray cleaner or compressed gas for cleaning the device.
•
Never pour liquid cleaner on the instrument. Always put the cleaning solvent on to a clean applicator (i.e. clean, dry cloth
or applicator stick) first and then use the applicator to clean the exposed parts.
•
Isopropyl alcohol (IPA) is the recommended cleaning solvent.
•
Never use hard objects, acetone, thinner or benzene to clean the instrument.
Upon delivery
Unpacking
•
Inspect box for damage prior to opening. If the box appears damaged, please notify the shipping company and NYFORS or
your eventual distributor as soon as possible.
•
Remove all contents from the box and verify that all items are included.
•
Save packaging material for future use.
Supplied in package
•
AUTOCLEAVER LDF
™
•
USB-stick with PC-software (AUTOCLEAVER Controller) & User Manual
•
Getting started: Quick installation guide for AUTOCLEAVER LDF
™
& Controller software
•
Delivery & Calibration Certificate
•
2pcs Allen key (1.3mm & 2.5mm)
•
RS-232 cable (Null-modem cable)
Required accessories
Please choose proper fiber handling parts according to your fiber holder system and fiber dimensions, and power supply with
country specific adaptor. See Appendix B for a list of available parts and accessories.
Note: included parts in the delivery kits may vary between countries and regions.
