10
Flashing characteristics of the start button
A LED in the start button is used to indicate the status of the cleaver:
Green:
Standby: Cleaver is ready to be used
Green:
Busy: Wait until cleaver is ready
Green:
Done: Press start button to continue/reset
Red:
Error: Press start button to reset
Red:
Fatal error: Disconnect power from cleaver and then
connect it again. If fault remains, contact your service
agent.
Overview of the GUI (graphical user interface)
1.
Drop-down menu
2.
Progress information window
3.
Position setting
4.
Tension setting
5.
Reads setting from cleaver
6.
Writes setting from cleaver
For more information about menus, functions and how-to setup the cleaver via the controller application, see
respective section in the manual.
1
2
3
4
5
6
