NXP Semiconductors
UM10276_1
TED-Kit 2 User Manual
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2010. All rights reserved.
User manual
Rev. 1.29 — 20 August 2010
17 of 79
Fig 17. Immobilizer default settings
This sets the default values (for the selected transponder) for the authentication, trans-
mission and reception parameters at once.
To start the immobilizer applet, one has to click the
S
S
t
t
a
a
r
r
t
t
button only (Fig 18).
Fig 18. Immobilizer starting
Now, the applet continuously tries to authenticate with HITAG2-Extended transponder in
the antenna’s field. If no transponder is in range, the Immobilizer window looks like Fig
19.
Fig 19. Immobilizer “No Transponder”