26
SLN-VIZNAS-IOT User Guide, Rev. 1.1, 10/2020
NXP Semiconductors
3.1.3 SW3
– Toggle IR/RGB Output
Figure 30: SW3
When using all but the
userid
), both cameras are
always active, however only the output from one camera can be displayed at a time. The
SW3 push button can be used to toggle between the output coming from the IR and RGB
cameras as shown in the following figure.
Figure 31: SW3
The behavior of SW3 is identical to that of the
“display output_mode <rgb|ir>”
command.
