SHELL>> list -c
Users registered 2
Figure 44. List registered user names or count
6.3.2 Manually add users
To register a new face in manual mode, simply use the command “add <username>.” This command acts nearly identically to
manual registration using the SW3 pushbutton, but allows for the addition of a specific user name instead of a generic user name.
Additionally, using the “add” command with no arguments functions identically to the manual registration process using the
SW3 pushbutton.
SHELL>> add Cooper
SHELL>> add
Figure 45. Manually add new user with specific or generic user name
6.3.3 Manually delete users
To delete a previously registered user, use the “del -n” command followed by the user name, or “del -i” followed by the user ID to
delete that specified user.
SHELL>> del -n Cooper
Delete was successful
SHELL>> del -i 0
Delete was successful
Figure 46. Manually delete user
Additionally, using the “del” command with no arguments functions identically to the manual deregistration process using the
pushbuttons SW2.
SHELL>> del
Figure 47. Manually delete next recognized user
Alternatively, running the command “del -a” will erase every user previously registered.
SHELL>> del -a
All users successfully deleted
Figure 48. Manually delete every user
NXP Semiconductors
Additional features
SLN-VIZN3D-IOT Kit User Guide, Rev. 0, 01 November 2021
User Guide
31 / 47
