NXP Semiconductors
UM11806
PTN3222CUK-EVB demo board user manual
1 Introduction
PTN3222CUK is a one-port eUSB2 to USB2 redriver IC that performs translation
between eUSB2 and USB2 signaling schemes. It is meant to be used in systems that
have an eUSB2 interface on one side and a USB2 interface on the other side. It supports
host-role only, device-role only or dual-role repeater function.
PTN3222CUK implements repeater mode (eUSB2 to USB2 redriver) and it supports
Link Power management features. PTN3222CUK is targeted to be USB2 compliant and
eUSB2 conformant. It supports all three speeds/data rates: low speed (1.5 Mbps), full
speed (12 Mbps) and high speed (480 Mbps).
This document is intended to help a user quickly set up, configure and operate the
PTN3222CUK-EVB evaluation board in the user's hardware platform. The user manual is
applicable to both evaluation boards.
2 Getting ready
Working with the PTN3222CUK-EVB evaluation board requires the kit contents,
additional hardware, and a Windows PC workstation with installed software.
2.1 Kit contents
The PTN3222CUK-EVB kit includes:
•
Assembled and tested evaluation board in an antistatic bag
•
Quick Start Guide
3 Finding kit resources and information on the NXP web site
NXP Semiconductors provides online resources for this evaluation board and its
supported device(s) on
.
The information page for the PTN3222CUK-EVB evaluation board is at
. The information page provides overview
information,documentation, software and tools, parametrics, ordering information and
a Getting Started tab. The Getting Started tab provides quick-reference information
applicable to using the PTN3222CUK-EVB evaluation board, including the downloadable
assets referenced in this document.
4 Getting to know the hardware
UM11806
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2022. All rights reserved.
User manual
Rev. 1 — 25 May 2022
4 / 10