NXP Semiconductors
AN11841
PN7150 Arduino SBC Kit Quick Start Guide
AN11841
All information provided in this document is subject to legal disclaimers.
© NXP Semiconductors N.V. 2016. All rights reserved.
Application note
COMPANY PUBLIC
Rev. 1.2 — 19 August 2016
373012
5 of 21
2. Quick Startup on UDOO Neo
2.1 Required items
• UDOO Neo [2]
• Compatible MicroSD card of at least 4 Gb memory size (8 Gb for Android demo image)
• Computer (running Windows, Linux or Mac OS X) for SD/MicroSD card installation and
remote access to UDOO Neo
• Micro USB cable to connect UDOO Neo to the computer
• UDOO Neo demo image file (see [9])
• Other than for Linux NFC demo (see 2.4), where UDOO Neo is run as a headless IoT
device, one need for the Android NFC demo (see 2.5) in addition the following items:
-
USB Mouse
-
Micro HDMI cable to connect to Monitor / TV
-
UDOO 12V power supply (
Note: the 5V generated by UDOO Neo board from
the Micro USB is not stable on the Android image. Without the 12V power
supply the RF discovery may suddenly stop
)
2.2 Hardware preparation
First of all assemble the PN7150 NFC Controller Board with the Arduino Interface Board.
Fig 2.
OM5578/PN7150ARD demo kit assembly
