NXP Semiconductors MWCT101 S Series, Reference Manual

Page: 573 / 1761

Field Function
This read/write bit enables the interface clock for the peripheral, allowing access to the module's
registers. It also controls whether the clock selection and divider options can be modified.
0b - Clock disabled. The current clock selection and divider options are not locked and can be
modified.
1b - Clock enabled. The current clock selection and divider options are locked and cannot be
modified.
29
—
This read-only bit field is reserved. This bit can change values but is a don't-care.
28-27
—
This read-only bit field is reserved and always has the value 0.
26-24
—
This read-only bit field is reserved and always has the value 0.
23-4
—
This read-only bit field is reserved and always has the value 0.
3
—
This read-only bit field is reserved and always has the value 0.
2-0
—
This read-only bit field is reserved and always has the value 0.
27.6.5 PCC FlexCAN1 Register (PCC_FlexCAN1)
27.6.5.1 Offset
Register Offset
PCC_FlexCAN1 94h
27.6.5.2 Function
This register is for the FlexCAN1 module.
Chapter 27 Peripheral Clock Controller (PCC)
MWCT101xS Series Reference Manual, Rev. 3, 07/2019
NXP Semiconductors 573