NXP Semiconductors MKW01Z128, Reference Manual

Page: 380 / 884

Chapter 14
Miscellaneous Control Module (MCM)
14.1 Introduction
NOTE
For the chip-specific implementation details of this module's
instances, see the chip configuration information.
The Miscellaneous Control Module (MCM) provides a myriad of miscellaneous control
functions.
14.1.1 Features
The MCM includes the following features:
• Program-visible information on the platform configuration
• Crossbar master arbitration policy selection
• Flash controller speculation buffer and cache configurations
14.2 Memory map/register descriptions
The memory map and register descriptions found here describe the registers using byte
addresses. The registers can be written only when in supervisor mode.
MCM memory map
Absolute
address
(hex)
Register name
Width
(in bits)
Access Reset value
Section/
page
F000_3008
Crossbar Switch (AXBS) Slave Configuration
(MCM_PLASC)
16 R 0007h 14.2.1/250
Table continues on the next page...
MKW01Z128 MCU Reference Manual, Rev. 3, 04/2016
Freescale Semiconductor, Inc. 249