NXP Semiconductors MKW01Z128, Reference Manual

Page: 303 / 884

8.2.17 COP Control Register (SIM_COPC)
All of the bits in this register can be written only once after a reset.
Address: 4004_7000h base + 1100h offset = 4004_8100h
Bit 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
R
0
W
Reset
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Bit 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
R
0
COPT
COPCLKS
COPW
W
Reset
0 0 0 0 0 0 0 0 0 0 0 0 1 1 0 0
SIM_COPC field descriptions
Field Description
31–4
Reserved
This field is reserved.
This read-only field is reserved and always has the value 0.
3–2
COPT
COP Watchdog Timeout
This write-once field selects the timeout period of the COP. COPT along with the COPCLKS field define
the COP timeout period.
00 COP disabled
01 COP timeout after 2
5
LPO cycles or 2
13
bus clock cycles
10 COP timeout after 2
8
LPO cycles or 2
16
bus clock cycles
11 COP timeout after 2
10
LPO cycles or 2
18
bus clock cycles
1
COPCLKS
COP Clock Select
This write-once field selects the clock source of the COP watchdog.
0 Internal 1 kHz clock is source to COP.
1 Bus clock is source to COP.
0
COPW
COP Windowed Mode
Windowed mode is supported only when COP is running from the bus clock. The COP window is opened
three quarters through the timeout period.
0 Normal mode
1 Windowed mode
Memory map and register definition
MKW01Z128 MCU Reference Manual, Rev. 3, 04/2016
172 Freescale Semiconductor, Inc.