NXP Semiconductors MKW01Z128, Reference Manual, Page: 23 / 884

MKW01Z128 Introduction and Chip Configuration
MKW01xxRM Reference Manual, Rev. 3, 04/2016
1-12 Freescale Semiconductor, Inc.
1.7.2.10 Communication interfaces
The following wired communication interfaces are available on this device.
1.7.2.11 Human-machine interfaces
The following human-machine interfaces (HMI) are available on this device.
1.7.2.12 System Device Identification Register
The system device identification register contains device specific information factory programmed into the
in-package MCU die.
Table 1-12. Communication interfaces
Module Description
Internal serial peripheral interface
(SPI)
Synchronous serial bus for communication to an external device
Inter-integrated circuit (I2C) Allows communication between a number of devices. Also supports the System
Management Bus (SMBus) Specification, version 2.
Universal asynchronous
receiver/transmitters (UART)
Asynchronous serial bus communication interface with programmable 8- or 9-bit data
format
Table 1-13. HMI modules
Module Description
General purpose input/output
(GPIO)
All general purpose input or output (GPIO) pins are capable of interrupt and DMA request
generation. All GPIO pins have 5 V tolerance.
Capacitive touch sense input (TSI) Contains up to 10 channel inputs for capacitive touch sensing applications. Operation is
available in low-power modes via interrupts.
Table 1-14. Device-Specific Values
Field ID Value
FAMID 0001
SUBFAMID 0111
SERIESID 0001
SRAMSIZE 0101
REVID 0001
DIEID 01010
PINID 0010