NXP Semiconductors MKW01Z128, Reference Manual, Page: 15 / 884

MKW01Z128 Introduction and Chip Configuration
MKW01xxRM Reference Manual, Rev. 3, 04/2016
1-4 Freescale Semiconductor, Inc.
• Connectivity and Communications:
— Three UARTs, two SPIs, and two I
2
C
• Reliability, Safety and Security:
— Hardware cyclic redundancy check engine for validating memory contents/ communication
data and increased system reliability
— Independent-clocked computer operating properly (COP) for protection against code runaway
in fail-safe applications
• Timing and Control:
— Powerful timer modules that support general-purpose, PWM, and motor control functions
— Programmable Interrupt Timer for RTOS task scheduler time base or trigger source for ADC
conversion and programmable delay block
• System:
— Wide operating voltage range from 1.8 V to 3.6 V with flash programmable down to 1.8 V with
fully functional flash and analog peripherals
— Ambient operating temperature ranges from –40°C to 85°C
1.5 RF transceiver features
• High Sensitivity: down to –120 dBm at 1.2 kbps
• High Selectivity: 16-tap FIR Channel Filter
• Bullet-proof front end: IIP3 = –18 dBm, IIP2 = +35 dBm, 80 dB Blocking Immunity, no Image
Frequency response
• Low current: RX = 16 mA, 100 nA register retention
• Programmable Pout : –18 to +17 dBm in 1 dB steps
• Constant RF performance over voltage range of chip
• FSK bit rates up to 600 kbps
• Fully integrated synthesizer with a resolution of 61 Hz
• FSK, GFSK, MSK, GMSK and OOK modulations
• Built-in Bit Synchronizer performing Clock recovery
• Incoming Sync Word Recognition
• Automatic RF Sense with ultra-fast AFC
• Packet engine with CRC, AES-128 encryption and 66-byte FIFO
• Built-in temperature sensor and Low battery indicator
• 32 MHz (typical) crystal oscillator clock source
1.6 Software solutions
Freescale will support the MKW01Z128 platform with several software solutions: