Figure 3. Overview of the MIMXRT1060 EVK board (Back side)
2.1 i.MX RT1060/1064 processor
The i.MX RT1060/1064 is a new processor family featuring NXP advanced implementation of the Arm Cortex-M7 Core. It provides
high CPU performance and best real-time response. i.MX RT1060/1064 provides various memory interfaces, including SDRAM,
Raw NAND flash, NOR flash, SD/eMMC, Quad SPI, HyperBus, and a wide range of other interfaces for connecting peripherals,
such as WLAN, Bluetooth
™
, GPS, displays, and camera sensors. i.MX RT1060/1064 has rich audio and video features, including
LCD display, basic 2D graphics, camera interface, S/PDIF, and I2S audio interface.
The i.MX RT1060/1064 applications processor can be used in areas such as industrial HMI, IoT, motor control, and home
appliances. The flexibility of the architecture enables it to be used in a wide variety of other general embedded applications too.
The i.MX RT processor provides all interfaces necessary to connect peripherals such as WLAN, Bluetooth
™
, GPS, camera
sensors, and multiple displays.
The more detail information about i.MX RT1060/1064 can be found in the
Datasheet and Reference Manual
.
2.2 Boot mode configurations
The device has four boot modes (one is reserved for NXP use). The boot mode is selected based on the binary value stored in
the internal BOOT_MODE register.
Switch (SW7-3 and SW7-4) is used to select the boot mode on the MIMXRT1060/1064 EVK board.
Table 2. Boot mode pin settings
BOOT_MODE[1:0] (SW7-3 SW7-4)
BOOT Type
Table continues on the next page...
NXP Semiconductors
Specifications
MIMXRT1060/1064 Evaluation Kit Board Hardware User's Guide, Rev. 0, 06/2020
User's Guide
7 / 19