NXP Semiconductors MC9S12VRP64, Owner Reference Manual

Page: 233 / 555

S12S Debug Module (S12DBGV2)
MC9S12VRP Family Reference Manual Rev. 1.3
NXP Semiconductors 233
6.5.6 Scenario 5
Trigger if following event A, event C precedes event B. i.e. the expected execution flow is A->B->C.
Figure 6-34. Scenario 5
Scenario 5 is possible with the S12SDBGV1 SCR encoding
6.5.7 Scenario 6
Trigger if event A occurs twice in succession before any of 2 other events (BC) occurs. This scenario is
not possible using the S12SDBGV1 SCR encoding. S12SDBGV2 includes additions shown in red. The
change in SCR1 encoding also has the advantage that a State1->State3 transition using M0 is now possible.
This is advantageous because range and data bus comparisons use channel0 only.
Figure 6-35. Scenario 6
6.5.8 Scenario 7
Trigger when a series of 3 events is executed out of order. Specifying the event order as M1,M2,M0 to run
in loops (120120120). Any deviation from that order should trigger. This scenario is not possible using the
S12SDBGV1 SCR encoding because OR possibilities are very limited in the channel encoding. By adding
OR forks as shown in red this scenario is possible.
Figure 6-36. Scenario 7
State1
Final State
State2
SCR1=0011
SCR2=0110
M1 M0
M2
State1
Final State
State3
SCR1= 1001
SCR3= 1010
M0 M0
M12
State1
Final State
State3
State2
SCR1= 1101
SCR2= 1100
SCR3= 1101
M1
M2
M12
M0
M02
M01