NXP Semiconductors
Page 2
Page 3
Page 4
However, always check jumper positions on actual boards
since there is no guarantee that all jumpers are in default place.
Default jumper settings are indicated in the schematic.
UL = UnLoaded = normally not mounted component.
USB mini-B
3.3V
External powering (+5V)
powering
USB
Design Overview
Page 5
External powering (+3.3V)
Schematic page 4
Schematic page 2-3
Schematic page 5-6
Page 6
Analog channel, digital channels, jtag/swd/trace interface
External JTAG/Cortex debug interface
Boot mode, LPC4370 IOs, external spi flash
USB 2.0 interface, LPC4370 USB, reset, crystal, jtag/swd
Power supplies
LED
Power supplies
3.3V
LPC4370 power supplies
LPC4370 JTAG/SWD connector
LPC4370 crystal, reset
LPC4370 IOs
Serial Expansion Interface
External SPI flash
Analog channel
Digital channels
External jtag/swd/trace connector
External jtag/swd interface
LPC-Link 2
