NXP Semiconductors KE1xF Series, Reference Manual, Page: 147 / 1483

AIPS_PACRn field descriptions (continued)
Field Description
0 This peripheral does not require supervisor privilege level for accesses.
1 This peripheral requires supervisor privilege level for accesses.
13
WP4
Write Protect
Determines whether the peripheral allows write access. When this bit is set and a write access is
attempted, access terminates with an error response and no peripheral access initiates.
0 This peripheral allows write accesses.
1 This peripheral is write protected.
12
TP4
Trusted Protect
Determines whether the peripheral allows accesses from an untrusted master. When this field is set and
an access is attempted by an untrusted master, the access terminates with an error response and no
peripheral access initiates.
0 Accesses from an untrusted master are allowed.
1 Accesses from an untrusted master are not allowed.
11
Reserved
This field is reserved.
This read-only field is reserved and always has the value 0.
10
SP5
Supervisor Protect
Determines whether the peripheral requires supervisor privilege level for accesses. When this field is set,
the master privilege level must indicate the supervisor access attribute, and the MPR
x [MPL n ] control field
for the master must be set. If not, access terminates with an error response and no peripheral access
initiates.
0 This peripheral does not require supervisor privilege level for accesses.
1 This peripheral requires supervisor privilege level for accesses.
9
WP5
Write Protect
Determines whether the peripheral allows write accesses. When this field is set and a write access is
attempted, access terminates with an error response and no peripheral access initiates.
0 This peripheral allows write accesses.
1 This peripheral is write protected.
8
TP5
Trusted Protect
Determines whether the peripheral allows accesses from an untrusted master. When this field is set and
an access is attempted by an untrusted master, the access terminates with an error response and no
peripheral access initiates.
0 Accesses from an untrusted master are allowed.
1 Accesses from an untrusted master are not allowed.
7
Reserved
This field is reserved.
This read-only field is reserved and always has the value 0.
6
SP6
Supervisor Protect
Determines whether the peripheral requires supervisor privilege level for accesses. When this field is set,
the master privilege level must indicate the supervisor access attribute, and the MPR
x [MPL n ] control field
for the master must be set. If not, access terminates with an error response and no peripheral access
initiates.
Table continues on the next page...
Chapter 9 Peripheral Bridge (AIPS-Lite)
Kinetis KE1xF Sub-Family Reference Manual, Rev. 4, 06/2019
NXP Semiconductors 147