NXP Semiconductors K32 L2A Series, Reference Manual, Page: 869 / 1379

Chapter 33
Miscellaneous Control Module (MCM)
33.1 Introduction
NOTE
For the chip-specific implementation details of this module's
instances, see the chip configuration information.
The Miscellaneous Control Module (MCM) provides a myriad of miscellaneous control
functions.
33.1.1 Features
The MCM includes the following features:
• Program-visible information on the platform configuration
• Crossbar master arbitration policy selection
• Flash controller speculation buffer and cache configurations
33.2 Memory map/register descriptions
The memory map and register descriptions found here describe the registers using byte
addresses. The registers can be written only when in supervisor mode.
MCM memory map
Absolute
address
(hex)
Register name
Width
(in bits)
Access Reset value
Section/
page
F000_3010
Crossbar Switch (AXBS) Slave Configuration
(MCM0_PLASC)
16 R 000Fh 33.2.1/870
Table continues on the next page...
K32 L2A Reference Manual, Rev. 2, 01/2020
NXP Semiconductors 869