NXP Semiconductors K32 L2A Series, Reference Manual, Page: 831 / 1379

LPUARTx_MODIR field descriptions (continued)
Field Description
0 Transmitter RTS is active low.
1 Transmitter RTS is active high.
1
TXRTSE
Transmitter request-to-send enable
Controls RTS before and after a transmission.
0 The transmitter has no effect on RTS.
1 When a character is placed into an empty transmitter data buffer , RTS asserts one bit time before the
start bit is transmitted. RTS deasserts one bit time after all characters in the transmitter data buffer
and shift register are completely sent, including the last stop bit.
0
TXCTSE
Transmitter clear-to-send enable
TXCTSE controls the operation of the transmitter. TXCTSE can be set independently from the state of
TXRTSE and RXRTSE.
0 CTS has no effect on the transmitter.
1 Enables clear-to-send operation. The transmitter checks the state of CTS each time it is ready to send
a character. If CTS is asserted, the character is sent. If CTS is deasserted, the signal TXD remains in
the mark state and transmission is delayed until CTS is asserted. Changes in CTS as a character is
being sent do not affect its transmission.
Chapter 31 Low Power Universal Asynchronous Receiver/Transmitter (LPUART)
K32 L2A Reference Manual, Rev. 2, 01/2020
NXP Semiconductors 831