JN517x-DK005
Development
Kit
User Guide
JN-UG-3121 v1.1
© NXP Semiconductors 2017
33
2.4.2 Controlling the Dimmable Light from the PC
The Dimmable Light within the ZigBee network can be controlled from the IoT
Gateway interface on a web browser on a PC (refer to the step
on the PC to the IoT Gateway” on page 27
). The light is accessible in the interface via
the “Lamps” tab or the “Mobile Site” tab, shown below.
To control the Dimmable Light from the IoT Gateway interface:
Step 1 Access the Dimmable Light in the web browser on the PC
Select the “Lamps” or “Mobile Site” tab in the IoT Gateway interface on the PC.
If on the “Mobile Site” tab, click on the lamp icon that represents the Dimmable Light.
The following controls for the light will now be displayed:
If on the “Lamps” tab, the above controls are already displayed on the right side.
Figure 12: Dimmable Light on Lamps Tab
Figure 13: Dimmable Light on Mobile Site Tab
