NXP Semiconductors freescale KV4 Series, Reference Manual

Page: 610 / 1359

NVM Normal Mode — An NVM mode that provides basic user access to flash memory
module resources. The CPU or other bus masters initiate flash program and erase
operations (or other flash commands) using writes to the FCCOB register group in the
flash memory module.
Phrase — 64 bits of data with an aligned phrase having byte-address[2:0] = 000.
Program flash — The program flash memory provides nonvolatile storage for vectors
and code store.
Program flash Sector — The smallest portion of the program flash memory
(consecutive addresses) that can be erased.
Retention — The length of time that data can be kept in the NVM without experiencing
errors upon readout. Since erased (1) states are subject to degradation just like
programmed (0) states, the data retention limit may be reached from the last erase
operation (not from the programming time).
RWW— Read-While-Write. The ability to simultaneously read from one memory
resource while commanded operations are active in another memory resource.
Secure — An MCU state conveyed to the flash memory module as described in the Chip
Configuration details for this device. In the secure state, reading and changing NVM
contents is restricted.
Word — 16 bits of data with an aligned word having byte-address[0] = 0.
32.2 External Signal Description
The flash memory module contains no signals that connect off-chip.
32.3 Memory Map and Registers
This section describes the memory map and registers for the flash memory module.
Data read from unimplemented memory space in the flash memory module is undefined.
Writes to unimplemented or reserved memory space (registers) in the flash memory
module are ignored.
External Signal Description
KV4x Reference Manual, Rev. 2, 02/2015
610
Preliminary
Freescale Semiconductor, Inc.