manualshive.com logo in svg

NXP Semiconductors freescale KV4 Series, Reference Manual

Share
Download
NXP Semiconductors freescale KV4 Series Reference Manual Download Page 571

• When using a 32.768 kHz external reference, if the maximum mid-range DCO

frequency that can be achieved with a 32.768 kHz reference is desired, set
C4[DRST_DRS] bits to 2'b01 and set C4[DMX32] bit to 1. The resulting DCO
output (MCGOUTCLK) frequency with the new multiplier of 1464 will be 48
MHz.

• When using a 32.768 kHz external reference, if the maximum mid high-range

DCO frequency that can be achieved with a 32.768 kHz reference is desired, set
C4[DRST_DRS] bits to 2'b10 and set C4[DMX32] bit to 1. The resulting DCO
output (MCGOUTCLK) frequency with the new multiplier of 2197 will be 72
MHz.

• When using a 32.768 kHz external reference, if the maximum high-range DCO

frequency that can be achieved with a 32.768 kHz reference is desired, set
C4[DRST_DRS] bits to 2'b11 and set C4[DMX32] bit to 1. The resulting DCO
output (MCGOUTCLK) frequency with the new multiplier of 2929 will be 96
MHz.

5. Wait for the FLL lock time to guarantee FLL is running at new C4[DRST_DRS] and

C4[DMX32] programmed frequency.

To change from FEI clock mode to FBI clock mode, follow this procedure:

1. Change C1[CLKS] bits in C1 register to 2'b01 so that the internal reference clock is

selected as the system clock source.

2. Wait for S[CLKST] bits in the MCG status register to change to 2'b01, indicating

that the internal reference clock has been appropriately selected.

3. Write to the C2 register to determine the IRCS output (IRCSCLK) frequency range.

• By default, with C2[IRCS] cleared to 0, the IRCS selected output clock is the

slow internal reference clock (32 kHz IRC). If the faster IRC is desired, set
C2[IRCS] to 1 for a IRCS clock derived from the 4 MHz IRC source.

30.5.2 Using a 32.768 kHz reference

In FEE and FBE modes, if using a 32.768 kHz external reference, at the default FLL
multiplication factor of 640, the DCO output (MCGFLLCLK) frequency is 20.97 MHz at
low-range.

Chapter 30 Multipurpose Clock Generator (MCG)

KV4x Reference Manual, Rev. 2, 02/2015

Freescale Semiconductor, Inc.

Preliminary

571

Summary of Contents for freescale KV4 Series
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands