manualshive.com logo in svg

NXP Semiconductors freescale KV4 Series, Reference Manual

Share
Download
NXP Semiconductors freescale KV4 Series Reference Manual Download Page 542

Table 29-6. Oscillator modes (continued)

Mode

Frequency Range

High-frequency mode1, high-gain

f

osc_hi_1

 (3 MHz) up to f

osc_hi_1

 (8 MHz)

High-frequency mode1, low-power

High-frequency mode2, high-gain

f

osc_hi_2

 (8 MHz) up to f

osc_hi_2

 (32 MHz)

High-frequency mode2, low-power

NOTE

For information about low power modes of operation used in
this chip and their alignment with some OSC modes, see the
chip's Power Management details.

29.8.2.1 Low-Frequency, High-Gain Mode

In Low-frequency, high-gain mode, the oscillator uses a simple inverter-style amplifier.
The gain is set to achieve rail-to-rail oscillation amplitudes.

The oscillator input buffer in this mode is single-ended. It provides low pass frequency
filtering as well as hysteresis for voltage filtering and converts the output to logic levels.
In this mode, the internal capacitors could be used.

29.8.2.2 Low-Frequency, Low-Power Mode

In low-frequency, low-power mode, the oscillator uses a gain control loop to minimize
power consumption. As the oscillation amplitude increases, the amplifier current is
reduced. This continues until a desired amplitude is achieved at steady-state. This mode
provides low pass frequency filtering as well as hysteresis for voltage filtering and
converts the output to logic levels. In this mode, the internal capacitors could be used, the
internal feedback resistor is connected, and no external resistor should be used.

In this mode, the amplifier inputs, gain-control input, and input buffer input are all
capacitively coupled for leakage tolerance (not sensitive to the DC level of EXTAL).

Also in this mode, all external components except for the resonator itself are integrated,
which includes the load capacitors and feeback resistor that biases EXTAL.

Functional Description

KV4x Reference Manual, Rev. 2, 02/2015

542

Preliminary

Freescale Semiconductor, Inc.

Summary of Contents for freescale KV4 Series
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands