NXP Semiconductors
UM11826
FRDMDUALK3664EVB evaluation board
1 Important notice
IMPORTANT NOTICE
For engineering development or evaluation purposes only
NXP provides the product under the following conditions:
This evaluation kit is for use of ENGINEERING DEVELOPMENT OR
EVALUATION PURPOSES ONLY.
It is provided as a sample IC pre-soldered to a printed-circuit board to make it
easier to access inputs, outputs and supply terminals. This evaluation board
may be used with any development system or other source of I/O signals by
connecting it to the host MCU computer board via off-the-shelf cables. This
evaluation board is not a Reference Design and is not intended to represent
a final design recommendation for any particular application. Final device in
an application heavily depends on proper printed-circuit board layout and heat
sinking design as well as attention to supply filtering, transient suppression,
and I/O signal quality.
The product provided may not be complete in terms of required design,
marketing, and or manufacturing related protective considerations, including
product safety measures typically found in the end device incorporating the
product. Due to the open construction of the product, it is the responsibility of
the user to take all appropriate precautions for electric discharge. In order to
minimize risks associated with the customers’ applications, adequate design
and operating safeguards must be provided by the customer to minimize
inherent or procedural hazards. For any safety concerns, contact NXP sales
and technical support services.
2 FRDMDUALK3664EVB
Figure 1. FRDMDUALK3664EVB
UM11826
All information provided in this document is subject to legal disclaimers.
© 2022 NXP B.V. All rights reserved.
User manual
Rev. 1 — 6 September 2022
3 / 17