NXP Semiconductors
UM11826
FRDMDUALK3664EVB evaluation board
Note:
The S32K3x4EVB-Q172 requires an external 12 V 2 A power supply.
Figure 6. FRDMDUALK3664EVB mounted on top of the S32K3x4EVB-Q172
7.2 Standalone or other microcontroller platforms
When the board is used in standalone or with other microcontroller platforms, the SPI
signals must be manually connected to the MCU interface connectors according to
.
Required power supply connections are:
•
VCC5 must be provided with 5.0 V
•
VIO must be provided with 3.3 V or 5.0 V depending on the required communication
signal levels
8 References
[1]
FRDMDUALK3664EVB
— detailed information on this board, including documentation,
downloads, and software and tools
http://www.nxp.com/FRDMDUALK3664EVB
[2]
MC33664
— product information on MC33664, isolated network high-speed transceiver
[3]
S32K3x4EVB-Q172
— detailed information on this board, including documentation,
downloads, and software and tools
https://www.nxp.com/S32K3X4EVBQ172
UM11826
All information provided in this document is subject to legal disclaimers.
© 2022 NXP B.V. All rights reserved.
User manual
Rev. 1 — 6 September 2022
13 / 17