Nvidia DGX Station A100 User Manual Download Page 23 | Manualshive

Page: 23 / 72

Nvidia DGX Station A100 User Manual Download Page 23

DGX Station A100

DU-10189-001 _v5.0.2 | 17

Chapter 3. Using the BMC

The DGX Station A100 comes with a baseboard management controller (BMC) to monitor and

control various hardware devices on the system, system sensors, and other parameters.

CAUTION:

Before you can log into the BMC, see the security information in

BMC features its own management network port and VGA Display port.

The DGX Station A100 features two display devices, the DGX Display Adapter and the BMC

Display Adapter. Depending on the BIOS settings you can direct the OS X display to either

adapter. These settings can be adjusted to use one of the three modes listed before from the

BIOS. The nvidia-conf-xconfig.service manages this function for the X-Windowing system.
Here is a list of the display select modes:

Auto

Automatically configures the X-windowing system to use whichever compatible display

adapter is currently present in the system. The default choice is to use the NVIDIA DGX

Display Adapter (mini-DP), however if this adapter is not present the on-board BMC Display

Adapter (15pin VGA) will be chosen. If neither of the adapters is detected for any reason, the

service will exit without setup.

«
...
21
22
23
24
25
...
»

Summary of Contents for DGX Station A100









































































Reviews:

No comments