95
N V I D I A C o r p o r a t i o n
C h a p t e r 8
D e v i c e S e l e c t i o n A n d C o n f i g u r a t i o n
Figure 8.13
Display Settings Dualview Mode: Windows 98
Note:
Use this feature if you have plugged in any display devices after the
control panel was opened.
6
Based on the example shown in
, you would click
TV
to switch
from Analog Display (CRT) to TV
or
, based on the example in
you would click
Digital Display
to switch from TV to Digital Display.
7
When the “Device Settings” message appears, click
OK
before
the message
times out.
The “Confirm Display Settings” message appears on your digital
display.
8
Click
Yes
before the message times out. You entire desktop moves over to
the display you selected.
nViewGuide_.book Page 95 Monday, August 11, 2003 4:03 PM
