1
ODESSA V2 LED FLOODLIGHT INSTRUCTIONS
Issue 04 on 5
th
March 2021
THANK YOU
for buying this product. To help ensure it gives complete satisfaction please install it according
to these instructions and then pass the instructions to the appropriate person for retention and future
reference.
SAFETY
This is a mains powered product. It is designed to be installed by suitably qualified personnel
only and in accordance with the applicable building and electrical regulations. Before installation or
maintenance the electrical supply to the product must be isolated.
INSTALLATION SUPPORT
If installation advice or accessories are required please contact us at the above
address. We will do our best to help. When reporting a suspected fault or seeking installation support the
problem is likely to be resolved most quickly if you have full product details to-hand, as well as details of when
and where it was purchased.
LUMINAIRE INSTALLATION
1. Secure the luminaire into its required fixing position using the fixing holes/slots provided in the stirrup
mounting bracket (see diagrams above), ensuring the chosen method is sufficient to support the
luminaire weight.
2. To rotate the luminaire to the required angle, loosen the two hinge screws where the stirrup bracket
joins the main fitting with an allen key, rotate to required position, then retighten to secure.
3. The luminaire is supplied with a power supply lead already attached. Route the free end to a suitably
IP rated connection point (minimum IP65) & terminate ensuring correct polarity is observed.
WARNING: THIS LUMINAIRE MUST BE EARTHED
4. Reconnect power supply & check for correct operation.
MAINTENANCE
The luminaire should be switched off & allowed to cool before any maintenance is carried out.
1. Cleaning of the glass front cover should be carried out at regular intervals so as not impair
photometric performance.
2. Dust should not be allowed to accumulate on the rear of the product as this will affect the thermal
performance of the heat sink.
