nux NPS-1, Installation Manual

Page: 1 / 2

NPS-1 Piano Stand
lnstallation Guide
List of Parts
Backboard
Left Sideboard Right Sideboard
Triple Pedal Unit
f'
Corner Bracket Quantity: 4PCS
�
Sideboard Stand Pad Quantity: 4PCS
�
M6*20 Screw Quantity: 4PCS
-
M5*35 Screw
Quantity: BPCS
-
BA4*12 Screw
Quantity: BPCS
-
KA3.5*12 Screw Quantity: BPCS
c:::::::J
Wooden Connector
Quantity: 2PCS
�
Cable organizer
Quantity: 2PCS
Installation
1. Assembling the two Side Boards.
Corner Bracket
Left Sideboard Right Sideboard---
Sideboard Stand Pad
2. Assembling the Triple Pedal Unit & the Backboard.
a. Lay down the Triple Pedal Unit on the leveled ground,
untie the triple pedal cable. Attach the triple pedal unit
to the sideboards with 4 M5*35 screws.
F
Triple Pedal Unit
M5*35 Screw
M5*35Screw
b. Put wooden connectors into the backboard as shown.
Backboard
�
[-----�---J-------]·)cU
t
Wooden Connector
c. Secure the backboard to the sideboards with 4 M5* 35
screws.
Backboard
M5*35Screw
3. Mount the Keyboard.
Hold the keyboard horizontally, and place it on the stand,
then secure the keyboard to the stand with 4 M6* 20
screws. Plug in the triple pedal cable to the [Triple Pedal]
Jack, use the cable organizer to keep the triple pedal cable
in place.
� ao
o
0
1· �· ·1C}
Ba=
=1....J
,
M6*20Screw
�Cable organizer
4. Installation completed.
www.nuxefx.com
Made in China