NuTiny-SDK-M058S User Manual
Aug. 1, 2013
3 of 16
Rev. 1.00
1
Overview
The NuTiny-SDK-M058S is a specific development tool for NuMicro M058S
series by which users can develop and verify the application program easily.
The NuTiny-SDK-M058S includes two portions: NuTiny-EVB-M058S (an
evaluation board) and Nu-Link-Me (Debug Adaptor). With the NuTiny-SDK-
M058S, users do not need additional ICE or debug equipment.
2
Introduction to NuTiny-SDK- M058S
The following figure shows the NuTiny-SDK-M058S for M058S series, in
which the left portion is called NuTiny-EVB-M058S and the right portion is
Debug Adaptor called Nu-Link-Me.
The NuTiny-EVB-M058S is similar to other development board. Users can
use it to develop and verify applications to emulate the real behavior. In fact,
the real chip M058S is mounted on the board. The NuTiny-EVB-M058S can
be a real system controller to design user target system.
The Nu-Link-Me is a Debug Adaptor which
connects the USB port of your PC
to your target system (via Serial Wired Debug Port) and allows you to
program and debug embedded programs on the target hardware. To use the
Nu-Link-Me Debug adaptor with Keil or IAR, ple
ase refer to “Nuvoton
NuMicro™ IAR ICE Driver User Manual” or Nuvoton NuMicro™ Keil ICE
Driver User Manual
” for details.
Figure 2-1 NuTiny-SDK-M058S (Green PCB Board)
