Nuvoton NuMicro NUC029 Series, Technical Reference Manual, Page: 136 / 497

NuMicro® NUC029LEE/NUC029SEE
32-bit Arm
®
Cortex
®
-M0 Microcontroller
Aug, 2018 Page 136 of 497
Rev 1.00
N
U
MICRO
®
N
UC02
9L
E
E
/N
UC029
S
E
E
T
E
CHN
ICA
L R
E
F
E
R
E
NC
E
M
A
NU
A
L
PWM2 and PWM3 used the same peripheral clock source; both of them used the same
prescaler. The perpherial clock source of PWM2 and PWM3 is defined by PWM23_S
(CLKSEL1[31:30]) and PWM23_S_E (CLKSEL2[9]).
If PWM23_S_E = 0, the peripheral clock source of PWM2 and PWM3 defined by
PWM23_S list below:.
. 00 = Clock source from 4~24 MHz external high speed crystal oscillator clock.
. 01 = Clock source from 32.768 kHz external low speed crystal oscillator clock.
. 10 = Clock source from HCLK.
. 11 = Clock source from 22.1184 MHz internal high speed RC oscillator clock.
If PWM23_S_E = 1, the peripheral clock source of PWM2 and PWM3 defined by
PWM23_S list below:.
. 00 = Reserved.
. 01 = Reserved.
. 10 = Reserved.
. 11 = Clock source from 10 kHz internal low speed RC oscillator clock.
[8] PWM01_S_E
PWM0 And PWM1 Clock Source Selection Extend
PWM0 and PWM1 used the same peripheral clock source; both of them used the same
prescaler. The peripheral clock source of PWM0 and PWM1 is defined by PWM01_S
(CLKSEL1[29:28]) and PWM01_S_E (CLKSEL2[8]).
If PWM01_S_E = 0, the peripheral clock source of PWM0 and PWM1 defined by
PWM01_S list below:.
. 00 = Clock source from 4~24 MHz external high speed crystal oscillator clock.
. 01 = Clock source from 32.768 kHz external low speed crystal oscillator clock.
. 10 = Clock source from HCLK.
. 11 = Clock source from 22.1184 MHz internal high speed RC oscillator clock.
If PWM01_S_E = 1, the peripheral clock source of PWM0 and PWM1 defined by
PWM01_S list below:.
. 00 = Reserved.
. 01 = Reserved.
. 10 = Reserved.
. 11 = Clock source from 10 kHz internal low speed RC oscillator clock.
[7:6]
Reserved
Reserved.
[5:4] PWM45_S
PWM4 And PWM5 Clock Source Selection
PWM4 and PWM5 used the same peripheral clock source; both of them used the same
prescaler. The peripheral clock source of PWM4 and PWM5 is defined by PWM45_S
(CLKSEL2[5:4]) and PWM45_S_E (CLKSEL2[10]).
If PWM45_S_E = 0, the peripheral clock source of PWM4 and PWM5 defined by
PWM45_S list below:.
00 = Clock source from 4~24 MHz external high speed crystal oscillator clock.
01 = Clock source from 32.768 kHz external low speed crystal oscillator clock.
10 = Clock source from HCLK.
11 = Clock source from 22.1184 MHz internal high speed RC oscillator clock.
If PWM45_S_E = 1, the peripheral clock source of PWM4 and PWM5 defined by
PWM45_S list below:.
00 = Reserved.
01 = Reserved.
10 = Reserved.
11 = Clock source from 10 kHz internal low speed RC oscillator clock.
[3:2] FRQDIV_S
Clock Divider Clock Source Selection
00 = Clock source from 4~24 MHz external high speed crystal oscillator clock.