NuMaker-M483KG
May.
10, 2019
Page
6
of 40
Rev 1.00
N
UMA
K
E
R
-M4
83
K
G
US
E
R MA
NUA
L
Ma
k
er Nu
-m
be
d
NUC
47
2
Us
er Man
ua
l
1
OVERVIEW
This user manual is aimed to give users a fast introduction to the use of NuMaker-M483KG board.
The NuMaker-M483KG consists of two parts, a M483 platform and an on-board Nu-Link2-Me
debugger and programmer. The NuMaker-M483KG allows users to quickly develop and easily
program and debug application.
The NuMaker-M483KG offers M483KGCAE2A full pins extension connectors and Arduino UNO
compatible extension connectors. It is an easy-to-develop platform for user to expand the functionality
and build the applications. The NuMaker-M483KG also provides an ammeter connector, allows user to
monitor the microcontroller’s power consumption during development.
The Nu-Link2-Me is a debugger and programmer that supports on-line programming and debugging
through SWD interface. The on-board 16 Mbit SPI Flash allows it able to off-line programming the
target microcontroller. Nu-Link2-Me provides virtual COM port (VCOM) function to print out messages
on PC. Nu-Link2-Me can be separated from NuMaker-M483KG, allowing user to use as a mass
production programming tool.
Figure 1-1 NuMaker-M483KG Board
NuMaker-M483KG Features
1.1
NuMicro
®
M483KGCAE2A used as main microcontroller with function downward
compatible with:
M483SGCAE
M482LGCAE
M482ZGCAE
M483KGCAE2A full pins extension connectors
Arduino UNO compatible extension connectors
Ammeter connector for measuring
the microcontroller’s power consumption
Fixable board power supply:
External V
DD
power connector
Arduino UNO compatible extension connector Vin
USB FS connector on M483 platform
