Maintenance
Inspection Before Use
64
Nuvo Group Ltd.
7
Maintenance
This section describes how to maintain the
INVU Sensor Band™
.
7.1
Inspection Before Use
If the
INVU Sensor Band™
package,
INVU Sensor Band™
, or any of its accessories are
damaged or are not intact
—
do not use the device and contact Nuvo Group customer
support.
Make sure to inspect the items below. If there is any problem, contact Nuvo Group
customer support.
•
Figure 7-1
. INVU Sensor Band™ exterior view (the outer side)
Item
Inspection
2- Controller with On/Off power button
Press the power ON/OFF switch on the control
unit to see if the power lamps on the control unit
light up. Check if the battery has been charged.
1- Rear closing strap
6- Upper frontal adjustment straps (×2)
3- Lower frontal adjustment straps (×2)
Check all straps (the inner side or outer)- for any
damage-tear, wear or fabric layers separations.
4,5- Textile band
Check textile band (the inner side or outer) for
any damage- tear, wear or fabric layers
separations.
7- Side plastic with the band QR-code
Check for any damage in the QR code sticker.
Figure 7-2
. INVU Sensor Band™ interior view (the
side facing abdomen skin)