Using the INVU Sensor Band™
Initiating a Monitoring Session
24
Nuvo Group Ltd.
5.2
Initiating a Monitoring Session
Your medical care team will prescribe the monitoring session duration and the number of
sessions that should be conducted. Starting a session will only be possible during the
assigned clinic hours and according to your scheduled session appointments.
Tips for a successful monitoring session!
✓
Make sure you are connected to a Wi-Fi network.
✓
Start monitoring at a comfortable relaxed position: lying on your back, sitting or
reclining.
✓
Minimize your movements as much as possible during monitoring.
✓
Pay attention to INVU App sounds and notifications during the session.
✓
Avoid initiating or answering phone calls or the use
of any highly consuming internet
bandwidth
applications of your smartphone during the session setup and the
monitoring itself.
Turn the
INVU Sensor Band™
ON by shortly pressing on the Controller ON/OFF power
button, located on the right side of the
INVU Sensor Band™
.
Figure 5-1
. INVU Sensor Band™ p
ower button
Once the
INVU Sensor Band™
is powered ON, wait until a steady green light appears on
the Controller.
Verify your Bluetooth connectivity is enabled on your mobile device and that you have
access to the Internet. Internet access must be available either via Wi-Fi (recommended)
or a mobile phone data plan (i.e., the cellular network).
Note:
The
INVU Sensor Band™
transfers data to the mobile application via
Bluetooth
communication. You should be near your mobile device at a distance that does not exceed
5 meters (about 16 feet), and there should be no walls in between.
Launch the
INVU™ App and log in.
Press “PREPARE FOR MONITORING”. The application will connect to the device if it
wasn’t previously connected.
A steady blue LED light on the controller indicates the band is connected.