Invu by Nuvo™
User Manual
First Time Using INVU by Nuvo™
NV-UMLS-0012
17
4.5
Onboarding Process
The onboarding process walks you through connecting your band to your account and learning how
to put on and use your band with a training program. The training program is mandatory before your
first clinical session- be sure to complete your training before your first monitoring session.
Figure 4-1. Onboarding screen
Connecting Your Device
After a short walkthrough process, you will be asked to connect your
INVU Sensor Band™
to
your account. Connecting your device will be done by scanning the QR code located on your
band.
The
INVU™
App requests you to enable Bluetooth and Wi-Fi on your mobile device.
Note:
Wi-Fi connection is recommended, connect via cellular only if Wi-Fi is
n’t available.
To enable Bluetooth connection on your device:
Go to "settings" on your mobile device.
Enable Bluetooth.
Enable Wi-Fi and verify there is a Wi-Fi connection.