11
EN
TECHNICAL OWNER MANUAL
D
B
NFINITY
ASSEMBLY OF COMPONENTS
6.6 Harmony
TM
Hub Interface
Compatibility & Orientation
1.
Ensure you have the correct
Nfinity
Hub
Interface for your
NuVinci Optimized
CVP.
•
N330
TM
CVPs have a yellow dot (
A
), and
are compatible with
Nfinity
330
Hub
Interfaces designated with a light grey
interior (
B
).
•
N360 and N380 CVPs have a black
colored shift driver (
C
), and are compatible
only with
Nfinity
380
Hub Interfaces
designated with a black interior (
D
).
2.
Use the uninstalled
Nfinity
Hub Interface (
E
)
to determine the desired orientation
•
Typical orientation is forward, parallel to
the chain stay or seat stay cable routing.
•
Move the
Nfinity
Hub Interface along the
dropout to ensure clearance at different
axle positions.
3.
With the
Nfinity
Hub Interface oriented
correctly inside the right dropout, the
installation angle (
F
) is the indicated
angle of the dropout (20 degrees in this
example).
•
Use the markings on the
Nfinity
Hub
Interface to determine your approximate
installation angle.
3.3 Nfinity
TM
Hub Interface Compatibility
& Orientation
N330
and
N360/N380
series
CVPs have different shift driver
configurations, and are compatible
only with the appropriate
Nfinity
Hub
Interface. Do not attempt to fit incorrect
Nfinity
Hub Interfaces, as damage will occur.
C
compatible
compatible
incompatible
incompatible
E
0°
F
0°
20°
!
Nfinity 330
Hub Interface
Nfinity 380
Hub Interface
N360/N380
CVP
A
N330
CVP
