8
NB 5 Fuse (2x4A)
NB 9 Fuse (2x5A)
NB 20 Fuse
(2x10A)
Earthed Wall
Sockets
5.
INSTALLATION
5.1
ENVIRONMENTAL CONDITIONS
The instrument is designed to operate safely under the following conditions:
Indoor use only
Ambient temperature: 5°C to 40°C
Maximum relative humidity for temperature up to 31°C: 80%
Maximum altitude: 2000 m
Temperature for maximum performance: 15°C / 25°C
5.2
HANDLING AND TRANSPORTATION
All handling and transportation must be carried out by using proper equipment and experienced
staff. The instrument must be supported underneath and never be turned upside down.
5.3
UNPACKING
Remove the cardboard box packing and the second nylon wrapping around the instrument.
Ensure that no damage has occurred during transportation. The below mentioned are provided
with the instrument, please check them;
1 ea. user’s manual and warranty
1 ea. electrical cable
1 ea. perforated grid
5.4
MAINS SUPPLY
The instrument requires 230 V, 50 / 60 Hz.
Please make sure that the supplied mains matches the required power ratings which are written
on the name of plate of the instrument located at the back of the instrument.
Always plug-in the instrument to correctly grounded sockets.
A supply fitted with a circuit breaker should be used for protection against indirect
contact in case of isolation fault.
5.5
POSITIONING
Check that the positioning is suitable for the users.
Check that the instrument is stable on its four pedestals.
Check that the user will be able to follow up the operation even when he deals with something
else.
