13
Wait by pressing the encoder button.
Lift your hand when you see "oP" on the temperature
display and again press the encoder button. If the
device has a menu protection password, password
screen “oPS” will come on the temperature display.
You enter the set password to turn the encoder button
right and left. ( The password will not be asked if the
device is newly installed.) Confirm the password by
pressing the encoder button. Observe that the
parameter numbers on the temperature display
change with each pressing the encoder button. For
operator menu parameter descriptions (see section
6.1.1). You can set the parameter values by turning
the encoder button right or left on time display.
Again press the encoder button and confirm the set
value. Press the back button to return the work
screen.
6.1.1
oP Operator Menu Parameters
1:
Recording Period
: This time is recording period of temperature and error information.
2:
Lid Alarm Time
: Not used for all NB models.
3:
Lid Alarm Range
: Not used for all NB models.
4:
Timer Set Band:
When the read temperature reaches the "Set Temperature - TIMER SET
BAND" value, the time starts counting backwards.
5:
Buzzer ON/OFF
: The alarm sound on/off 0: OFF 1: ON
6:
Date Setting - Year
: Two digits are displayed the year information of date. If updating is
necessary, change.
