20
6.1.6.
SET TEMPERATURE
When the setting key (F2) is pushed in the
operation mode, password page appears. This
password is the user’s password. The password is
0000 for the first usage. “Working Settings” page
on the left appears. The set temperature can be
adjusted between 0⁰C and 10⁰C by pushing the
value increase (F1) and decrease (F2) keys. After
set temperature value is entered, push the enter
key (F4) to save the value. Push the backspace key
(F3) to exit this page without any change.
In case of active audible alarm, firstly, push the alarm mute key (F2) to access the
working settings page.
6.1.7.
GRAPH WORKING SCREEN
When the graph button (F3) is pushed in the operation mode, the graph page comes to the
screen. Daily operation can be followed on this graph. If you want to analyze old operations,
visit the memory page (See Section 6.1.3).
7.
PERIODIC MAINTENANCE AND CLEANING
7.1.
PERIODIC MAINTENANCE
Clean the condenser surface with a vacuum cleaner every 3 months.
7.2.
CLEANING
Clean the refrigerator at room temperature after disconnecting the power cable.
Remove the shelves from their shelf carriers.
Clean the refrigerator with a damp cloth to remove dirt and dust.
Liquid detergent can be used to remove tough dirt.
Take precautions handling chemical cleaners.
Check the external condition of the refrigerator regularly and ensure any rust spots that may
develop are removed.
8.
DISPOSAL MANAGEMENT CONCEPT
The currently valid local regulations governing disposal must be observed. It is in the
responsibility of the user to arrange proper disposal of the individual components.
All parts which may comprise potentially infectious materials have to be disinfected by suitable
validated procedures (autoclaving, chemical treatment) prior to disposal. Applicable local
regulations for disposal have to be carefully observed.
The instruments and electronic accessories (without batteries, power packs etc.) must be
disposed off according to the regulations for the disposal of electronic components. Batteries,
