![NUVE EN 300 User Manual Download Page 13](http://html1.mh-extra.com/html/nuve/en-300/en-300_user-manual_1719821013.webp)
12
SECTION 7
TROUBLESHOOTING
If the incubator does not operate, check the followings,
The on/off switch is on,
The plug is plugged-in properly,
The plug is not defective,
The mains supply is present,
Fuses are sound,
The installation of the plug is not defective,
The incubator does not heat, check the followings,
The program is started,
The safety thermostat is adjusted higher than set temperature.
7.1 ERRORS RECOGNISED BY THE MICROPROCESSOR CONTROL
SYSTEM
OFL:
The chamber temperature exceeds 85°C.
The temperature sensor (Fe-Const) endings are broken.
IN CASE OF ANY ERROR, THE PROGRAM İS STOPPED AUTOMATİCALLY AND
İMMEDİATELY.
PLEASE CONTACT TO AN AUTHORIZED NUVE AGENT TO SEEK TECHNICAL HELP IF AN
ERROR OCCURS.
Summary of Contents for EN 300
