JUMBO 7000 HFK SCISSOR
Nussbaum Automotive Solutions, LP | 1932 Jordache Court, Gastonia, NC 28052 | 704.864.2470 | Email:
23
11.4.
ATTACHING PLATFORM EXTENSIONS
•
Locate the (4) Platform Extensions and the (4) Platform Extension Rods.
•
Align the holes on a Platform Extension with the holes at the end of a Platform.
•
Insert the Platform Extension Attachment Rod through the holes from the outside of the lift. (Fig. 20)
•
Extend the extension straight out (parallel with the top surface of the
platform) and push the flat end of the Platform Extension Rod past the
flange on the extension (inside) and then pivot it underneath the
extension.
•
Repeat the procedure for the remaining 3 extensions.
Slight pressure might be necessary. Lubrication
should be used during this procedure
Figure 17
Figure 18
Figure 20
Figure 19
