Operating Manual and Inspection Book
POWER LIFT HL 2.30 NT / HL 2.35 NT / HL 2.40 NT
20100016 OPI
- 52 -
Version 1.1
9 Safety inspection
The safety inspection is required to guarantee operational safety of the lift. It is to be done:
1. Before first commissioning after setting up the lift.
Use the "single safety inspection" form.
2. After first commissioning, check regularly at least once per year.
Use the "regular safety inspection" form.
3. After changes to the lift construction.
Use the "extraordinary safety inspection" form.
Single and regular safety inspections must be done by a specialist. It is recommended
to do maintenance at the same time.
After a change in construction (for example changing the load carrying capacity or
changing the lifting height) and after significant maintenance on load carrying parts
(e.g. welding work), inspection by a technical expert is
required (extraordinary
safety
inspection).
This inspection book contains forms with a printed inspection plan for safety inspections. Please
use the appropriate form, record the condition of the inspected lift and leave the completed form
in this inspection book.
Summary of Contents for HL 2.30 NT
Page 2: ......
Page 94: ...Notes ...
