Operating Manual and Inspection Book
POWER LIFT HL 2.30 NT / HL 2.35 NT / HL 2.40 NT
20100016 OPI
- 3 -
Version 1.1
Introduction
Nussbaum products are a result of many years of experience. A high quality standard and superior
concept guarantees you reliability, long lifetimes and economical operation. To prevent unnecessary
damage and hazards, read this operating manual carefully and always comply with its contents.
Any other use, or use beyond purpose is considered improper.
Otto Nußbaum GmbH & Co.KG is not liable for any resulting damage. The operating company
alone carries the risk.
Proper use also includes:
-
Adherence to all instructions in this operating manual and
-
Compliance with inspection and maintenance work and the inspections stipulated
-
The operating manual is to be followed by all personnel working on the lift. This is notably with
regards to Section 4 "Safety conditions"
-
In addition to safety information from the operating manual, comply with rules and regulations at the
location of use
-
Proper system handling
Operating company obligations:
The operating company is obliged to only permit personnel to work on the system who
-
Understand the principle regulations about work safety and accident prevention and who have been
trained in working with the lift.
-
Have read the safety section and warning information in this operating manual, have understood it
and confirmed learning with a signature.
Hazards in working with the system:
Nussbaum products have been designed and built to state-of-the-art and to recognized safety
standards. However, improper use may lead to hazards to life and limb of the user or result in property
damage.
The system may only be operated:
-
For proper intended use
-
If it is technically in perfect condition
Summary of Contents for HL 2.30 NT
Page 2: ......
Page 94: ...Notes ...
