Nussbaum ATT Rugboard, Operating Instructions Manual, Page: 33 / 42

AD U9001 N 06.12.07 33
Change to these settings:
At this point, you did successfully configurate the Wireless
settings on the PC.
4.3 Install VNC Server on the PC
! ! ! ! !
In case you already had some VNC Software installed, make
sure to terminate this prior to installation. It is recommended,
to uninstall it. In case you are working with
Windows NT, you
have to have at least Service Pack 3 installed.
Put the Server Installation CD into the drive.
Open up this configuration utility. On the first page 'Status', you
get ddisplayed that searching for a connection did not succeed.
Click to the second register 'Configuration'. On the first picture,
you see the default values being displayed. You have to change
them as shown to the second one. In the first field, you will have
to select 'Adhoc' (no Access Point used), or 'Infrastructure', in
case you are working with one or more Access Point(s). In any
case, the settings of PC and Rugboard have to match. The
standard way is to use 'ATT_WLAN' as SSID, and '9911991199'
as the password. You may deviate from that, but then you have
to make sure yourself that the settings of PC, Rugboard, and (if
applicable) the Access Points.
Default: