background image

 Operating Instruction and Documentation

 

                                                                                                                  4.40 ND 

 

- 5 - 

After completely filling out this sheet including signatures, copy and return  the 
original to the manufacturer. The copy must remain in the manual. 

 

Otto Nußbaum GmbH & Co. KG 

Korker Straße 24 

D-77694 Kehl-Bodersweier

 

 

Record of installation

 

 

The automotive lift with the 

 

serial number:............................................ 

was installed on:............................................... 

 

at the firm:.................................................  

at:..................................................................... 

 

The initial safety check was carried out and the lift was started. 

The installation was carried out by the operating authority/competent (please delete as applicable). 

The initial safety check was carried out by a competent person before the initial operation. 

The operating authority confirms the correct installation of the automotive lift, the competent person 

confirms the correct initial operation. 

 

Used Dowels(*):________________________________(Type/Name)       
 
Minimum anchorage depth (*) kept: _________________mm 

 

 

 

F

 ok 

 
Starting torque (*) kept: __________________________NM  

 

 

 

F

 ok 

 

............................................ .....................................................  ............................................ 

date 

       name 

of 

the 

operating 

authority  

signature of the operating authority 

 

............................................ .....................................................  ............................................ 

date 

       name 

of 

the 

competent 

person   

signature of the competent person 

 

 

Your customer service:.....................................................................................................(stamp) 

 

(*) 

see supplement of the dowel manufacturers

   

 

 

 

 

 

 

Automotive Lift date: 11/2009 /  Manual date: 20.11.2009 

 

Summary of Contents for 4.40 ND

































































Reviews: