background image

 

Operating Instruction and Documentation 

                                                                                                                        

2.30 SPL                      

 

- 3 - 

 

Foreword 

 
Nußbaum lifting systems are the result of over 25 years experience in the automotive lifting industry. 
The high quality and the superior concept ensure reliability, a long lift lifetime and above all and 
economic business solution. 
To avoid unnecessary damage, injury or even death, read the operating instructions with care and 
observe the contents. 
Nußbaum lifts is not responsible for incidents involving the use of Nußbaum lifting systems for 
applications other than those for  which they were designed. 
   

Nußbaum Hebetechnik GmbH & Co.KG  is not liable for any resulting damages. The user 

carries the risk alone. 

 

Obligations of the user: 

-    

To observe and adhere to the operating instructions. 

-  

To follow the recommended inspection and maintenance procedures and carry out the    
prescribed tests. 

The operating instructions must be observed by all persons working with or around the lift.  

Above all chapter 4 “Safety Regulations“ is very important and must be closely adhered to. 

-  

In addition to the safety regulations stated in the operating instructions manual, the    
appropriate safety regulations and the operating procedures of the place of operation must also 
be considered. 

 

Obligations of the operator: 

The operator is obliged to allow only those persons complying to the following requirements to work 
with or around the unit. 
-    

Persons being familiar with the basic regulations concerning labour safety and accident 
prevention and being trained to operate the particular unit. 

Persons having read and understood the chapter concerning safety and warning symbols.  

Persons using the lift are required to confirm that they have read and understood the chapter on 
safety and warning symbols by signing the appropriate form. 

 

Dangers when operating the lift: 

Nußbaum-Lifts are designed and built according to technical standards and the approved 
regulations for technical safety. The use of Nußbaum lifts for purposes other than those for which they 
were designed, may result in injury or even death. 
 

The lift must only be operated : 

For its appropriate use 

In faultless condition concerning technical security. 

 

Organisational Requirements: 

The instructions for use, are to be kept at the place of operation being easily access able  
at any time. 

-    

In addition to the instructions for use, rules pertaining to other regulations i.e. accident 
prevention and environmental rules are to be observed and adhered to. 

Summary of Contents for 2.30 SPL











































Reviews: