Appendix C: Setting the Starting
Location and Troubleshooting the Probe
Appendix C
There are 3 possible images on the screen in the pre-scanning.
C.1 Pre-Scan Image to the Left of Center
If the pre-scan image looks like Figure C-1, press the “-“button in the “Scanning Adjust” section in the
system setting screen. Input the degree of
∠
a, as Figure C-4 shows (
∠
a equals the center of the image
between the red line’s degree).
Figure C-1 Image center-left.
Figure C-2 Correct
Figure C-3. Image center-right
Page
50
